TIP500

16 Channel of Isolated 12 bit A/D Conversion module TIP500

16 Channel of Isolated 12 bit A/D Conversion

 

 

 

ПРОИЗВОДИТЕЛЬ: TEWS TECHNOLOGIES GmbH

ОПИСАНИЕ:

The TIP500 is an IndustryPack® compatible module with 16 single-ended or 8 differential channels of isolated 12 bit A/D conversion. The data acquisition and conversion time is up to 10µs without channel / gain change and up to 12.5µs with channel / gain change.

The input multiplexer offers analog overvoltage protection of up to 70Vpp. A programmable gain amplifier allows gains of 1, 2, 5, 10 or 1, 2, 4, 8. The full-scale input range is +/-10V for the TIP500-1x and 0-10V for the TIP500-2x.

The isolated ADC, programmable gain amplifier and multiplexer are powered by an on board DC/DC converter. An interrupt can be generated at end-of-conversion supporting an 8 bit vector. Each TIP500 is factory calibrated. The calibration information is stored in the Identification-PROM unique to each IP.

Technical Specification:

 

Logic Interface

IndustryPack® Logic Interface

 

Size

Single Size IP

 

I/O Interface

50-conductor flat cable

 

Analog Inputs

16 single-ended channels or 8 differential channels

 

Input Isolation

All channels are galvanically isolated from the IP interface
DC/DC converter on board

 

Input Gain Amplifier

TIP500-10x / TIP500-20x: programmable for gain 1, 2, 5, 10
TIP500-11x / TIP500-21x: programmable for gain 1, 2, 4, 8

 

Input Voltage Range

TIP500-10x
+/- 10V (gain = 1)
+/- 5V (gain = 2)
+/- 2V (gain = 5)
+/- 1V (gain = 10)
TIP500-20x
0V to 10V (gain = 1)
0V to 5V (gain = 2)
0V to 2V (gain = 5)
0V to 1V (gain = 10)
TIP500-11x
+/- 10V (gain = 1)
+/- 5V (gain = 2)
+/- 2.5V (gain = 4)
+/- 1.25V (gain = Cool
TIP500-21x
0V to 10V (gain = 1)
0V to 5V (gain = 2)
0V to 2.5V (gain = 4)
0V to 1.25V (gain = Cool

 

Input Overvoltage

Protection up to 70Vpp

 

Input ADC

12 bit ADC; data acquisition and conversion time up to 10µs without channel / gain change and up to 12.5µs with channel / gain change (mode-dependent)

 

Calibration Data

In ID PROM for gain and offset correction

 

Accuracy

+/- 1LSB for all TIP500 modules after calibration

 

Linearity

+/- 1LSB for all TIP500 modules

 

Wait states

IDSEL: 1 wait state
IOSEL: no wait states
INTSEL: no wait states

 

Power Requirements

310mA typical @ +5V DC

 

Temperature Range

Operating -40°C to +85°C
Storage -45°C to +125°C

 

Humidity

5 - 95% non-condensing

 

MTBF

637000 h